Also Renault chooses recycle plastics

Valuable initiative by Renault in order to manufacture car more ecological and economic for environment protection, reducing environmental impact at all stages of life cycle (manufacture, use and end of life). Designed to be reused and recycled for 95%, these cars will show the trademark "eco2″. Materials and treatments used, are clean and are becoming standardised to ELV CE Directive for the automotive.

ELV directive regulates some standards. For example plastics used (for interior and exterior car components) should, as far as possible, have clean surface treatments (e.g. sputtering of chrome, for components usually chrome-plated) so that it is possible to recycle them when scrapping.

For more information on this intelligent trend of the market, you can read Kolzer news of the month of January 2008: "New sputtering lines to comply with Directives RoHS and ELV"

We also take advantage of this industrial tendency: the Kolzer vacuum coatings, positive to WOM test

The results of the exposures to WOM to which we have submit our customers' components in the first equipment of the automotive field, have given positive results. The exposure to WOM (water-o-meter) contemplates the exposure of the pieces to cycles of radiation, rain, humidity to simulate the weather conditions. It lasted 2000 hours (the standard required by car specifications), the results were positive on all the substrates (plastic and metal) and have shown no alteration: total absence of bubbles, blistering, cracks of the film or loss of gloss.

These results complete the series of chemical resistance tests previously made on Kolzer coatings and positively concluded: evidence of corrosion resistance to salt spray (NSS), acetic salt spray (Aass) and cupro-Saline-acetic spray (Cass) according to the normative ASTM b117 and ISO 9227, resistance to humidity (UNI EN ISO 7380-1), test immersion, resistance to dust, temperature cycles, resistance to liquid (UNI EN ISO 2812-1:1996 and UNI EN ISO 2812-2:1996, water, acid/alkali, hydrocarbons, oil) ageing tests in the light, besides numerous mechanical tests, including shock, bending, adhesion (test of grid UNI EN ISO 2409: 1996) and impact. Other tests are currently in progress.

9001 gm en IQNet gm al