New Tubes with absorber coating installed in Sevilla and Casaccia

During the month of October, new vacuum tube receivers were installed in two demonstration facilities of the IN POWER project for testing and validation. These 4 meters long tubes are equipped with a new absorber coating made by Tekniker’s Unit for Physics of Surfaces and Materials.

The first demonstration plant is the Linear Fresnel Collector (LFC) located in Sevilla within the facilities of Magtel whereas the second plant is a parabolic trough collector (PTC) located in Casaccia within the facilities of ENEA.
These absorber coatings will be tested in vacuum conditions for high temperature operation regime at ENEA facilities and medium temperature regime at Magtel facilities.
In addition, the LFC plant in Sevilla, that was especially built for the project, was equipped a few weeks before with new scaled up polymeric mirrors produced by WP3 partners, NEMATIA, GEOCAD and KOLZER. This makes the Magtel plant a high-tech laboratory on concentrated solar power!

Figure 1: Installation of high absorber coated tubes at LFC loop in Magtel facilities
Figure 1: Installation of high absorber coated tubes at LFC loop in Magtel facilities
Figure 2: Installation of high absorber coated tubes at PTC in ENEA facilities
Figure 2: Installation of high absorber coated tubes at PTC in ENEA facilities
Figure 3: Installation of INPOWER polymeric mirrors at LFC loop in Magtel
Figure 3: Installation of INPOWER polymeric mirrors at LFC loop in Magtel

 

9001 gm en IQNet gm al